<%@ Language=VBScript%> <% ' VI 6.0 Scripting Object Model Enabled %> <% if StartPageProcessing() Then Response.End() %>

Site Map              Directions Program Summary: This advanced class is designed to give the students extensive hands-on programming time on the CNC Mill and an introduction to CAM software. Building upon the knowledge gained from the basic G-Code programming class, each student will create a tool path, post a part program from the CAM system and download it to the CNC machine to fabricate the part. The student will learn to set the work coordinate system and all necessary tool offsets. Who Should Attend?: Individuals looking to further develop knowledge of milling machine center and its functions. Program Prerequisites: Course #CN040 or equivalent. Computer Literacy. AutoCAD or other CAD software is helpful. Course # Course Name Hours CN140 Advanced G-Code and Machine Operation 25 Course Covers: Set-up of the CNC Milling Center Setting the Work Coordinate Systems Setting the tool heights and diameters DNC drip feed Importing geometry into CAM Finding and solving alarm messages 2D CAM Fundamentals Creating and editing toolpath in CAM Running the part program and measuring the results Changing tool offsets to meet the finished dimensions of a part Editing a part program after the initial run Controlling lead in/lead out parameters Toolpath verify in CAM Program Schedule: Monday and Tuesday 6:00 p.m. to 10:10 p.m.

CDM Institute     -    40 Galesi Drive     Wayne, NJ 07470     973.785.1234     -     Copyright 2001 CDM Institute. All Rights Reserved.

<% ' VI 6.0 Scripting Object Model Enabled %> <% EndPageProcessing() %>